NAD C 388 Vollverstärker, Verstärker & Netzwerkplayer, hifiteam, home entertainment for you
NAD C 388 Vollverstärker, Verstärker & Netzwerkplayer, hifiteam, home entertainment for you NAD C 388 Vollverstärker, Verstärker & Netzwerkplayer, hifiteam, home entertainment for you NAD C 388 Vollverstärker, Verstärker & Netzwerkplayer, hifiteam, home entertainment for you

NAD C 388 Vollverstärker

NAD


€1,699.00 €1,999.00





Stereoplay 01-2017:

Klang: Spitzenklasse

Gesamturteil: gut - sehr gut

Preis/Leistung: sehr gut

NAD Österreich bietet ab 1.7.2017 auf alle NAD Produkte 5 Jahre Garantie gemäß den Bedingungen des österreichischen NAD Importeurs.

Introducing the NAD C388:

Expansive Power with Unprecedented Flexibility.

The C 388 ties together all the critical elements of a top performing music system; music sources past, present, and future, in addition to providing a nearly unrestricted reservoir of power that allows your speakers to reveal every nuance of musical detail. This advanced amplifier includes many cutting edge technological breakthroughs developed by NAD over decades of creating affordable ultra-high performance audio components.

Getting the Basics Right

It is surprising how many seemingly advanced products in the market today often miss many of the most basic requirements for satisfying performance. Low noise circuits, precise volume control action, accurate channel balance, proper input and output impedance characteristics, high overload margins and stability with difficult speaker loads.

NAD starts by getting these things precisely right and advances from there. We include an MM Phono stage with precisely accurate RIAA equalization, high overload margins, extremely low noise, and an innovative circuit to suppress infrasonic noise that is present on all LPs – all without affecting bass response. Our line inputs can accommodate all kinds of analogue source components by offering ideal input impedance characteristics with linear ultra-low-noise buffer amplifiers to prevent any sonic degradation caused by inappropriate loading of the source device. We include a separate headphone amplifier with low output impedance and very high output voltage capability – enough to drive even high impedance studio monitor headphones. Low impedance line outputs that can connect to other amplifiers or subwoofers extend the versatility of this well thought out amplifier. These are all details you can hear.

 

Future-Proof Modular Design 

Connected and Smart

 You can connect instantly to the C 388 with Bluetooth® allowing you to stream music wirelessly from any Bluetooth-enabled device. The high performance aptX® codec is fully supported for true CD-quality sound. Bluetooth can also be used to listen to other sources connected to the C 388 via wireless headphones such as NAD’s own HP70. There is also a control app that allows your smartphone or tablet to control all functions of your C 388. Adding the optional BluOS Module provides access to your local area network via Wi-Fi or wired Ethernet connection and adds Hi-Res Audio streaming.

The BluOS Module also makes the C 388 a singlezone streamer in a complete multi-room wireless music system that is fully compatible with BluOS-enabled music systems and wireless speakers. These are available in a variety of sizes and shapes to fit every room and extend the performance of your primary music system to create a warm ambience of sound in your home.

 

Sophisticated Power

NAD has moved away from the old-fashioned power-hungry linear power supplies and Class AB output stages that waste nearly half of the energy consumed and produce heat rather than sound. Instead, we have developed even better performing circuits based on switch mode power supplies and Class D output stages. Once thought to be inferior to traditional topologies, NAD’s advanced work in this area has created some of the best performing amplifiers regardless of basic design principle.

These new designs are very linear over a wide bandwidth and provide consistent performance into all speaker loads, providing a dramatic advance over previous models.

The power supply is capable of 150 watts continuously and over 250 watts instantaneously to allow for short-term musical transients. It can operate with any AC mains voltage from 100 to 240 volts and provides pure DC power to all the various stages of the C 388. This highly efficient supply also provides near perfect regulation of voltage across a wide range of conditions and provides a solid noise-free foundation for the amplifying stages.

The C 388 uses a customized version of the proven Hypex UcD output stage operating in a fully balanced bridge configuration. This allows for massive power with nearly immeasurable distortion and noise in the audible range.

Every detail of this design has been carefully planned and perfectly executed to wring out every last drop of performance.

  • 150W x 2 Continuous power into 8 or 4 Ohms
  • Bluetooth ADP4 with aptX supported
  • MM Phono input
  • Analogue line inputs
  • USB input for support purposes
  • SPDIF coax and optical inputs
  • Speaker A, Speaker B
  • Preamp/Subwoofer out
  • Headphone amplifier
  • MDC Slots for future upgrades
  • IR remote
  • Smartphone Control App
  • 12V Trigger in/out
  • IR in/out
  • RS-232 Serial port for control
  • Control4, Crestron, RTI, URC, AMX, Savant, Elan certified
  • Continuous output Power into 4 Ω and 8 Ω (Stereo)
  • >150W (at rated THD, 20-20kHz, both channels driven)
  • IHF Dynamic Power
  • 2 Ω 400W
    4 Ω 350W
    8 Ω 250W
  • THD (20Hz-20kHz)
  • <0.02% (250mW to 150W, 8Ω and 4Ω)
  • Signal/Noise Ratio
  • >95dB (A-weighted, 500mV input ref. 1W out in 8 Ω)
    < 13dB (IHF; A-weighted, ref. 50W in 8 Ω, max volume)
  • Damping Factor
  • >150 (ref. 8 Ω, 20Hz and 6.5kHtz)
  • Frequency Response
  • ±0.03 (20Hz-20kHz)
  • Channel Separation
  • >75dB (1kHz)
    >70dB (10kHz)

GENERAL

  • Standby Power
  • <0.5W
  • Inputs
  • Digital: Coax x2, Optical x2
    Analogue: Line In x2, Moving Magnet Phono Preamp (0.3mV input sensitivity ref. 200mV pre-out)
  • Dimensions (W x H x D)
  • 435 x 120 x 390mm (17 1/8 x 4 3/4 x 15 3/8)”
  • Net Weight
  • 11.2kg (24.7lb)
  • Shipping Weight
  • 13.6kg (30lb)

 Something

Optional:

NAD MDC DD-BluOS Nachrüstmodul Bluesound

Das MDC DD BluOS Modul integriert leistungsfähiges HD Audio-Streaming in den Vollverstärker C390DD2 oder den Vorverstärker Masters M12. 
Mit BluOS und der zugehörigen Remote-App (Android, iOS, Kindle Fire) steht eine vollwertige, digitale Musikquelle zur Verfügung, 
die direkten Zugriff auf Musikarchive im lokalen Netzwerk, auf Online Musik-Streamingdienste und Internetradio ermöglicht. 
Dabei spielt es keine Rolle wo sich die Musik befindet. 
Ob auf einem NAS Laufwerk im lokalen Netzwerk, oder als Online-Streaming-Dienst, wie z.B. TIDAL/WiMP, Spotify, Qobuz, oder Radio, u.v.m. 
Über die USB Schnittstelle kann Musik auch von Massenspeichern wiedergegeben werden. 
Das BluOS Modul greift direkt auf freigegebene Musikordner (Shares) im Netzwerk zu und ist kompatibel mit einer Vielzahl an Audioformaten, 
darunter FLAC, AAC, ALAC, WAV, AIFF, WMA und OGG - mit bis zu 24 Bit/192 kHz. Für direktes, drahtloses Audio-Streaming 
von mobilen Geräten wie Smartphones, Computern oder Tablets, steht eine Bluetooth-Schnittstelle mit voller aptX-Unterstützung zur Verfügung. 
Darüber hinaus ist das DD-BluOS Modul kompatibel zu allen Bluesound Playern der ersten und zweiten Generation. 
Dies ermöglicht auf Wunsch die einfache Realisierung von Multiroom-Systemen im ganzen Haus und in überragender Klangqualität. 
Hochauflösendes Audio-Streaming mit bis zu 24Bit/192kHz.

Features
HD-Audiostreaming mit bis zu 24 Bit/192 kHz
Ethernet, WLAN, Bluetooth aptX
Internetradio über vTuner
USB-Schnittstelle für Massenspeicher

Allgemein
Für den C 368, C 388, C 390DD, M12, M32
Unterstützte Formate: FLAC, AAC, ALAC, WAV, AIFF, WMA, WMA-L, OGG, u.v.m
Fernbedienbar über NAD Remote-APP